Kudell auf Debian

apt install \
  vim gimp ffmpeg default-jdk git wget nano vim \
  htop locate zip p7zip p7zip-full unzip \
  gnome-shell-extension-manager nvidia-driver libavcodec-extra \
  vlc nvidia-detect nvidia-driver keepass2 emacs rsync curl \
  nvidia-opencl-icd imagemagick exiftool dcraw sqlitebrowser \
  smartmontools lshw inxi restic abcde lame easytag brasero \
  remmina needrestart scribus net-tools mono-complete mc pv \
  ntpsec ttf-mscorefonts-installer
  
sudo apt purge fonts-noto-color-emoji

Hinzufügen des Benutzernamens in die Zeile sudo der Datei /etc/group

Swappiness is 60 by default which is fine in most cases. But if you decrease this number, your system will use RAM more and start writing to Swap much later. Swap is an actual disk space and it is much slower than RAM. If you have 8G or more of RAM, you can force your system to use it at maximum.

First, check your swappiness value:

cat /proc/sys/vm/swappiness

Open the /etc/sysctl.conf file with Vim and add vm.swappiness = 10 at the very end.

ssh springm@hermes

sudo su
echo "restic --no-lock -p /root/resticpw -r /backupdisk/restic-repo mount /resticrestore" | at now
cd /resticrestore/hosts/kudell/latest
tar cjf /tmp/kudellroot.tg2 root
tar cjf /tmp/kudelletc.tg2 etc
tar cjf /tmp/kudellspringmssh.tg2 home/springm/.ssh

Auf kudell:

scp springm@hermes:/tmp/kudell*2 /tmp
mv ~springm/.ssh ~springm/.ssh.old
cd /tmp
tar xjf kudellroot.tg2
mv /root /root.old
mv root /

Damit sind die alten ssh-keys wieder intakt.

Ohne diese Maßnahmen funktioniert OpenCL nach Suspend-Resume nicht mehr in darktable.
Von: https://askubuntu.com/questions/1228423/how-do-i-fix-cuda-breaking-after-suspend

options nvidia NVreg_PreserveVideoMemoryAllocations=1
options nvidia NVreg_TemporaryFilePath=/tmp

anlegen und

systemctl enable nvidia-suspend.service

ausführen.

root@kudell:/home/springm# systemctl status nvidia-suspend.service
○ nvidia-suspend.service - NVIDIA system suspend actions
     Loaded: loaded (/lib/systemd/system/nvidia-suspend.service; enabled; prese>
     Active: inactive (dead)

Mai 29 10:23:59 kudell systemd[1]: Starting nvidia-suspend.service - NVIDIA sys>
Mai 29 10:23:59 kudell suspend[4896]: nvidia-suspend.service
Mai 29 10:23:59 kudell logger[4896]: <13>May 29 10:23:59 suspend: nvidia-suspen>
Mai 29 10:24:00 kudell systemd[1]: nvidia-suspend.service: Deactivated successf>
Mai 29 10:24:00 kudell systemd[1]: Finished nvidia-suspend.service - NVIDIA sys>

1.Install ethtool :

sudo apt install ethtool

2.Checking the Interface :

ip a

3.Select the interface you want to use. For Example : enp4s0

4.Turn wake on lan On Temporarily :

sudo ethtool --change enp4s0 wol g

5.Check the WOL status of the interface with the following command :

sudo ethtool enp4s0

6.find the bellow section :

Wake-on: g

Making wake on lan Permanent

7.find ethtool directory :

which ethtool

in my os : /usr/sbin/ethtool

8.Create wol.service in /etc/systemd/system/ with the following content.

[Unit]
Description=Enable Wake On Lan

[Service]
Type=oneshot
ExecStart = /usr/sbin/ethtool --change enp4s0 wol g

[Install]
WantedBy=basic.target

9.Enable The Service :

sudo systemctl daemon-reload
sudo systemctl enable wol.service

Download und installieren entsprechend Anweisungen entsprechend https://signal.org/download/linux/

siehe Darktable

siehe Raw Previews in Debian/Ubuntu

bash <(curl --proto '=https' --tlsv1.2 -sSf https://setup.atuin.sh)

Konfiguration für atuin in ~/.config/atuin/config.toml, wichtig hier die Zeile

sync_address = "http://192.168.2.252:8888"

damit der Atuin-Server auf hermes angesprochen wird

Download von https://binaries.webex.com/WebexDesktop-Ubuntu-Official-Package/Webex.deb
Installieren mit dpkg -i Webex.deb. Dependencies nachinstallieren mit apt-get -f install

Downloads in downloads verwandeln, damit Dokumente und downloads unterschiedlich beginnen und das autocomplete schon nach 2 Buchstaben funktioniert.

bash

# This file is written by xdg-user-dirs-update
# If you want to change or add directories, just edit the line you're
# interested in. All local changes will be retained on the next run.
# Format is XDG_xxx_DIR="$HOME/yyy", where yyy is a shell-escaped
# homedir-relative path, or XDG_xxx_DIR="/yyy", where /yyy is an
# absolute path. No other format is supported.
# 
XDG_DESKTOP_DIR="$HOME/Schreibtisch"
XDG_DOWNLOAD_DIR="$HOME/downloads"
XDG_TEMPLATES_DIR="$HOME/Vorlagen"
XDG_PUBLICSHARE_DIR="$HOME/Öffentlich"
XDG_DOCUMENTS_DIR="$HOME/Dokumente"
XDG_MUSIC_DIR="$HOME/Musik"
XDG_PICTURES_DIR="$HOME/Bilder"
XDG_VIDEOS_DIR="$HOME/Videos"

Installieren als normales Debian-Paket. Kee-Plugin holen und installieren mit

sudo su
exit
curl -s https://api.github.com/repos/kee-org/keepassrpc/releases/latest | jq -r ".assets[] | select(.name | test(\"KeePassRPC.plgx\")) | .browser_download_url" | xargs sudo curl -s -L -o "/usr/lib/keepass2/Plugins/KeePassRPC.plgx"
ls -l /usr/lib/keepass2/Plugins/KeePassRPC.plgx

siehe Adobe Reader unter Linux

siehe restic-backup-docker-hermes

For anyone who is using Ubuntu 18 (to give you the same behavior as e.g. on Windows10):

• go to settings > devices > keyboard
• look for the keyboard shortcut for “Switch windows”
• set this to the shortcut Alt+Tab (this will overwrite the old shortcut)

cd /usr/share/applications
sudo chmod 600 emacsclient.desktop emacs-term.desktop

Von https://www.debugpoint.com/gnome-40-macos-look-1/

Wird nicht vom Standard-Debian unterstützt

cd ~/projekte
mkdir kyocera
cd kyocera
git clone https://github.com/Fe-Ti/rastertokpsl-re/
cd rastertokpsl-re/
sudo apt install libcupsimage2-dev libcups2-dev cmake
cmake -B_build -H.
cmake --build _build/
sudo ./install.sh

Drucker in CUPS einrichten als socket://192.168.2.3:9100 und den neu gebauten Treiber ''Kyocera FS-1060DN-KPDSL angeben.

Sound funktioniert über die XONAR SE Soundkarte, Subwoofer läuft nicht am Subwoofer-Ausgang :(
Abhilfe: Subwoofer an den Rear-Port anschließen

mit “tweak”